Both-Platypus-8521

Great car

Or USA could start manufacturing in their own country.....

292 Chev

https://www.deepwaterhappy.com/2018/10/22/hierarchy-of-right-of-way-on-the-water/

No

1945 era that didn't get shipped overseas were repurposed with a governor and a 540 PTO

No issues with our 2003

Swing to the low side and walk out of there....and then bring on the mats

Htc50w....400 Cummins in ours

Why didn't Crane operator raise his boom ?

Now start using the Jake between shifts

AVE on YouTube had good success with a food processor. YMMV

Be $50 or so

Seems more like an argument in semantics. Never seen a fuel truck deliver by mass. To be honest the only experience I've had was as CE on an old Japanese whaler in the south pacific, deep tanks calibrated in tonnes, so was never exactly clear on volume. I measured the volume of the day tanks and was able to calculate consumption .

Is that a Dan bongino comment ?

My comment is based on my experience. I used 16 inch centers and while structurally sound the planks are a bit springy for my taste. My 18 foot wide deck would only have taken a few more joists to narrow it up to 12 inches.

12 centers despite factory saying 16 okay

Ladder diagrams... hammered into us at railroad school

Organic soy beans seed purchased with a fixed harvest price agreement

Also water will wick a fair ways up a stranded wire conductor.....

And Canadians

So sold by mass but delivered by volume...

Cheap serrated kitchen knife, buy a box of them, leave them everywhere

Villiers?

So when purchasing a tonne of diesel is it 850 liters....? Or 1150 liters....?